Security Grilles, Steel Doors, Security Doors, Window Security, Anti-Vandal Screens, Safes & IT Security

Anti-Burglar Bars Installation

Tailor made to measure, Bradbury Anti-Burglar Bars can be fitted to the reveal of a window, face fixed onto the surface of the reveal or a combination of the two. They can also be fitted vertically and horizontally.

This is important to specify at the point of order, as it determines where the fixing holes are to be placed so that they can be pre-drilled prior to delivery. Where the height of the barrier exceeds 1 metre a middle box section is used.

The red arrows on the illustrations show the different fixing positions for Reveal and Face fixed options.

Top Box:

Secures the bars in position. Shown here as face fixed.

Middle Box:

As shown here, the bars are face fixed by extending the width outside the reveal. Middle box section is only supplied when the height of the barrier exceeds 1 metre.

Fixing Bracket:

Middle box section is fitted inside the reveal using the fixing bracket.

Bottom Box:

Shown here as Reveal Fixed. The fixing holes are every other vertical.

Each individual solid steel bar is 20mm in diameter and has been designed to rotate through 360 degrees to make attack very difficult.