Both the frame and door are welded for increased strength and fully galvanized to protect against rust. (Galvanized where welded only)

 

Bradbury recommends outward opening doors for greater security.

 

 

PART	MATERIAL
Door Leaf	1. 60mm Zintec steel
Frame	2 00mm Zintec steel
Bottom Sill	2 00mm Zintec steel OR 1 60mm Stainless steel (this option comes unpajnted)
Core	Bonded honeycombe infill (45mm)
Hinges	Continous Piano Hinge • Stainless steel
Anti-Jemmy Strip	Integrated into the leading edge of the active door

A four sided frame accompanies all Bradbury Communal Entrance doors. They are reinforced in the corners and secured to the wall cavity through pre-punched fixing holes which are concealed from view.

To accommodate different installation requirements the frames are available as either 100mm or 150mm deep as standard.

(There have been occasions on internal opening doors that a skirting board or dado rail may obstruct the opening and interfere with the anti-jemmy strip, spacers can be supplied to over come this, please ask for details.)  

The bottom sills are available in the 2 profiles. Frames are also available without a bottom sill.

 

(This is a medium profile) 

 

 

Ideal for wheel chair access

The sloped profile is recommended for internal opening doors.

To have the bottom sill manufactured the same as the top sill, so that the frame matches all the way round, please see our Made to Measure doors or please ask for details.

Door Hardware & Handing

Communal Entrance doors have a wide selection of ironmongery and accessories including heavy duty 2mm thick vision panels with polycarbonate inserts, they can also be supplied with Electro Magnetic locks. Single doors use two 300kg mag-locks concealed in the vertical frame. 

Bradbury doors are available in a wide range of BS and RAL colours, in gloss, semi-gloss or textured. Bradbury has 21 stock colours with other colours are available on request.